Mark 10 Tensile Motorized Force & Torque Measurement Test System

Sale!

$7,300.00 $4,800.00

 

Mark 10 Tensile Motorized Force & Torque Measurement Test System

Mark 10 Motorized Tensile Torque Test System Consisting of (1)Mark 10 Motorized Force Measurement Test Stand Model:TSFM500. (1) Mark 10 Digital Force Gage Model: BG500 (1) Mark 10 Digital Controller Model: DC4040

The Mark 10 BG Digital Force Gauge is an advanced force measurement solution with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.

Features:

  • Compatible with all Mark 10 test stands and grips
  • RS-232, Mitutoyo and analog outputs
  • GCL-Gauge Control Language for full computer control
  • Automatic timed output on RS-232
  • Dual set points with outputs
  • Averaging mode for average readings over time
  • External trigger for contact or switch testing and data capture
  • General purpose I/O for external device control
  • Programmable analog and digital filters
  • Selectable units of measurement
  • Programmable default configuration
  • Peak memory for tensile and compressive forces
  • Push-button calibration
  • Battery or AC operation
  • Programmable automatic shutoff
  • Reversible aluminum housing for handheld use or test stand mounting (see below)
  • Same housing size for all capacities

Specifications

  • Accuracy: ± 0.2% of full scale ±1 digit
  • Sampling rate: 65 readings/sec
  • Display rate: 25-10/sec, 65/sec in peak mode
  • Display: 4-1/2 digit, 0.3 inch (7.6 mm) high LCD
  • Indicators for low battery , units and mode of operation
  • Power: AC or rechargeable battery with IPM, a 3-step Intelligent Power Management system that warns the user via LO BAT indicator and then will shut off the gauge
  • RS-232 – Fully configurable up to 9600 baud. Includes GCL (Gauge Control Language)
  • Mitutoyo output – Serial BCD suitable for all Mitutoyo SPC-compatible devices
  • Analog output – +/-VDC +/-0.25% of full scale at capacity. Positive for compression, negative for tension
  • Set point outuputs: 3 open collector lines (utilizing Mitutoyo lines)
  • General purpose I/O: 3 open collector outputs and one input (utilizing Mitutoyo lines)
  • Sensor detection: 0.010 (0.25 mm) maximum deflection at full load
  • Safe overload: 150% of capacity – display shows == at 110% and above
  • Battery life: 8-10 hours per charge
  • Weight – Gauge only: 0.9 lbs (0.4 kg)
  • Environmental requirements: 40°F – 100°F [5°C – 45°C], <96% humidity (non-condensating)

 

Category:

Description

Mark 10 Tensile Motorized Force & Torque Measurement Test System

Mark 10 Motorized Tensile Torque Test System Consisting of

(1)Mark 10 Motorized Force Measurement Test Stand Model:TSFM500.

  • Torque measurement to 200 lbFin (22 Nm)
  • PC control available
  • Digital angle indication
  • Stop / cycle at angle or torque
  • Overload protection

(1) Mark 10 Digital Force Gage Model: BG500 (1)

  • Accuracy: ± 0.2% of full scale ±1 digit
  • Sampling rate: 65 readings/sec
  • Display rate: 25-10/sec, 65/sec in peak mode
  • Display: 4-1/2 digit, 0.3 inch (7.6 mm) high LCD
  • Indicators for low battery , units and mode of operation
  • Power: AC or rechargeable battery with IPM, a 3-step Intelligent Power Management system that warns the user via LO BAT indicator and then will shut off the gauge
  • RS-232 – Fully configurable up to 9600 baud. Includes GCL (Gauge Control Language)
  • Mitutoyo output – Serial BCD suitable for all Mitutoyo SPC-compatible devices
  • Analog output – +/-VDC +/-0.25% of full scale at capacity. Positive for compression, negative for tension
  • Set point outuputs: 3 open collector lines (utilizing Mitutoyo lines)
  • General purpose I/O: 3 open collector outputs and one input (utilizing Mitutoyo lines)
  • Sensor detection: 0.010 (0.25 mm) maximum deflection at full load
  • Safe overload: 150% of capacity – display shows == at 110% and above
  • Battery life: 8-10 hours per charge
  • Weight – Gauge only: 0.9 lbs (0.4 kg)
  • Environmental requirements: 40°F – 100°F [5°C – 45°C], <96% humidity (non-condensating)

Mark 10 Digital Controller Model: DC4040

  • Digital controller for TSTM / TSTMH
  • Computer Control- An RS-232 port is provided to interface with a PC. DC controllers accept a number of commands pertaining to test stand motion and gauge functions
  • Overload Protection- Protects a force or torque gauge against overload. The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the controller to interface with virtually any force or torque gauge with analog output. Requires one of the above mentioned instruments and 09-1162 multi-function cable.
  • Auto-return- The crosshead moves to a limit switch, force (requires one of the above mentioned instruments and 09-1162 cable), or travel position (TSTM only), stops,

 

Leave a Reply

Your email address will not be published. Required fields are marked *